What is DSH Burner

It is a fuel burning or heat producing device that burns a

solid fuel in a controlled manner where the flame or heat

produced

k.jpg

Why Manglam DSH Burner?

  • The company has come up with a new system (Burners) for Industries, which are already using direct Biomass (sawdust, rice husk, wood) or Coal in their boilers or furnaces.

  • This Burner can be attached at the mouth of the boiler/furnace.

 

  • The fuel can be sawdust, rice husk, coal, wood, any other biomass, etc.

 

  • The fuel will go into this burner, Semi Gasification will happen and the gas generated can be used in boilers/furnaces.

Advantages of DSH Burner

  • No Emission of smoke from the boiler/furnace chimney. No Air Pollution.

  • Savings of 30-40%against direct Biomass or Coal use.

  • Most useful/suitable for all kinds of boilers/furnaces/thermic fluid heaters where direct burning is happening

Types of DSH  Burners

A) Saw Dust / Rice Husk / Mustered Husk/ Wheat Straw / Peanut Wastes Burner

The raw materials are fed into fuel bin and through air fan are blown into the sawdust/ rice husk burner. Through high-temperature cracking and suspended semi gasification combustion, the heat generated is transferred to the energy-using equipment. The principle of radiant and convection heat, three- stage of air distribution and increase in oxygen supply, result in sawdust/ rice husk burning fully in the furnace and more than 95% of heat is transferred to energy-using equipment.

raw.jpg

Feedstock of Sawdust/ Rice Husk Burner

Types of fuel:

sawdust, peanut shell dust, rice husk dust, etc.

 

Particle diameter : <3mm

 

Moisture content : <15%
Sawdust / Rice Husk Burner Connect with Boiler/ Furnace
10.jpg
connect.jpg

B) Coal / Wood Powder Burner

The raw materials are fed into fuel bin and through air fan are blown into the coal powder burner. Through high-temperature cracking and suspended semi gasification combustion, the heat generated is transferred to the energy-using equipment. The principle of radiant and convection heat, three- stage of air distribution and increase in oxygen supply, result in coal powder burning fully in the furnace and more than 98%of heat is transferred to energy-using equipment.

2.jpg

Feedstock of Coal / Wood Powder Burner

Types Of Fuel

Coal powder, petroleum coke powder with

size 150-200 mesh, volatile>25%; wood powder, sand powder, rice husk powder, etc. with

size 60-80 mesh

 

Moisture content: <15%

Coal / Wood Powder Burner Connect with Boiler/ Furnace

C) Biomass Wood Chip Burner

Even feeding of feedstock into the furnace, high temperature pyrolysis suspension semi-gasification combustion and the heat is transferred to the energy-using equipment. Using the principle of radiant and convection heat, the three-stage air supply is increased to make wood chip fully burnt in the furnace, in which more than85% of theheatis transferred to energy-using equipment.

 

  1. Hopper

  2. Nozzle

  3. Thermometer

  4. View hole

  5. Ignition hole

  6. Ash Discharge Hole.

1.jpg

Feedstock of Wood Chip Burner

 

Fuel Type:

wood chip, wood pellet, bamboo chip, Waste wood, building template,

Chinese medicine residue ect.

 

Size: <10cm

 

Moisture : <15%

Wood Stock.jpg

Biomass Wood Chip Burner Connect with Boiler / Furnace 3

Biomass Wood Connector.jpg

 D) Biomass Pellet Burner

Even feeding of feedstock into the furnace, high temperature pyrolysis suspension semi-gasification combustion and the heat is transferred to the energy-using equipment. Using the principle of radiant and convection heat, the three-stage air supply is increased to make wood chip fully burnt in the furnace, in which more than85% of theheatis transferred to energy-using equipment.

 

  1. Hopper

  2. Nozzle

  3. Thermometer

  4. View hole

  5. Ignition hole

  6. Ash Discharge Hole.

Pellet Burner.jpg

Feedstock of Pellet Burner

 

Fuel Type:

wood pellet, peanut shell pellet, rice husk pellet, waste bacterium rod, nutshell...

 

Particle diameter : q>6-10mm peanut shell pellet, nutshell <20mm

Moisture : <15%

E) Industrial Sludge Burner

Using a sludge-coupled biomass pyrolysis gasification treatment process, the Industrial Sludge Burner is designed and developed according to the purpose and principle of sludge disposal reduction, resource utilization and stabilization. This technology is also a kind of combustion technology, but unlike incineration, it uses the principle of anaerobic combustion, also known as pyrolysis gasification. It not only solves the problem of large investment in sludge incineration, large exhaust gas emissions and high toxic and harmful gas content, but also helps in disposal of domestic garden and agricultural waste and at the same time reducing cost of treatment considerably.

kh.jpg

Areas of Application

Spray Drying.jpg

Spray drying line

Steam Boiler.jpg

Steam Boiler

khks.jpg
Rotatary  dryer.jpg

Rotary dryer

Forging heating

Thermal oil Furnace.jpg

Thermal oil furnace

csdjcsd.jpg

Aluminum melting furnace

Coal-fired boiler

Incinerator

PRODUCT  RANGE